JoyOne factory · material calculator
Rubber Mulch Calculator
Rubber mulch is sold by weight, not by the yard, so the bag count depends on a density that varies more than any other material here.
Material calculator
- Volume
- 50 ft³
- Cubic yards
- 1.85 yd³
- Cubic metres
- 1.42 m³
- Weight
- 1,875 lb
- Short tons
- 0.94
- Metric tonnes
- 0.85 t
100 ft² of ground × 6 in average depth ÷ 12 = 50 ft³
50 ft³ × 37.5 lb/ft³ (Rubber mulch) = 1,875 lb
1.85 yd³ to buy, 47 bags
Type a price above to see a material total.
Bulk density 37.5 lb/ft³, published range 25–50. Wet material weighs more; your supplier's figure wins.
Area by area (1)
| # | Shape | Measurements | Depth | Area | Volume |
|---|---|---|---|---|---|
| 1 | Rectangle | 10 × 10 ft | 6 in | 100 ft² | 50 ft³ |
Worked examples
Every number below is produced by the same engine that runs in the browser, at build time — so the examples cannot drift from the calculator above.
| Scenario | Material | Volume | Cubic yards | Short tons | Metric tonnes | Bags |
|---|---|---|---|---|---|---|
| 10 × 10 ft at 6 in — playground depth | Rubber mulch | 50 ft³ | 1.85 yd³ | 0.94 | 0.85 | 47 bags of 40 lb |
| 20 × 3 ft border at 2 in | Rubber mulch | 10 ft³ | 0.37 yd³ | 0.19 | 0.17 | 10 bags of 40 lb |
| 12 ft circle at 1.5 in | Rubber mulch | 14.14 ft³ | 0.52 yd³ | 0.27 | 0.24 | 14 bags of 40 lb |
Why rubber mulch is a weight problem
Bark mulch is so light that nobody bothers to weigh it; rubber mulch is dense enough that suppliers do, and bags are labelled in pounds rather than cubic feet. That flips the calculation: instead of dividing a volume by a bag volume, you multiply the volume by a density to get pounds, then divide by the bag weight.
The trouble is the density. Ground rubber in the reference table ranges from 25 to 50 lb/ft³, which is a factor of two, and the difference is real: fine crumb rubber packs far more densely than chunky nuggets. The table here uses the midpoint, 37.5 lb/ft³, and the field accepts your supplier's figure, which is the only number that will match the bags they sell you.
The practical check is to weigh one bag on a kitchen scale, or to note the bag weight and the volume printed on it. Two minutes with a calculator gives you the density that matters for this material.
Playground depth comes from the handbook
CPSC Publication 325, Table 2 lists shredded or recycled rubber at 6 inches for a 10-foot fall height — the shallowest row in the table, and the only one with a footnote. The footnote says rubber loose fill does not compress in the same way as the other materials, but that depth still has to be maintained, because displacement happens anyway.
The same handbook says loose fill compresses at least 25% over time and should never be less than 9 inches except for shredded rubber, which is why the playground page pairs every table row with its initial fill. Six inches of maintained rubber is roughly eight inches at installation.
Read that as a floor, not a target. The handbook's depths are for the equipment's fall height, and the equipment manufacturer's instructions govern. This calculator does not certify a playground as safe.
Rubber in a garden bed
Rubber mulch in beds is a preference, not a horticultural practice: it does not break down, so it does not feed the soil, and it does not hold moisture the way bark does. It does last for years without topping up, which is the trade. If the bed is mostly shrubs and you are tired of buying bark, it works; if you are growing vegetables or improving soil, it does not.
Two practical notes. Rubber gets hot in direct sun, so keep it away from anything heat-sensitive. And it floats: in a bed that floods, it will migrate, so an edge matters more than it does with bark.
Containment, washing and the long view
Rubber nuggets are light enough to be kicked and to float, and they do not knit together, so an edge is essential on any bed beside a lawn, a drive or a drain. A steel or aluminium edge set below grade is the usual answer.
Washing rubber mulch is possible — hose it, stir it, let the grit run off — but it is a job that gets harder each year as fines work their way down. Most installations are simply topped up.
When it is finally removed, it goes to a recycling centre rather than the compost heap. That is worth knowing before you cover a large bed.
Bag counts that match the shelf
Rubber mulch is commonly sold in 40 lb bags, sometimes 20 lb or in bulk totes. The form lets you pick 40 lb, 20 lb or type your own bag weight, and the count is rounded up. A 10 × 10 ft bed at 6 inches is 50 cubic feet, which at 37.5 lb/ft³ is 1,875 lb — 47 bags of 40 lb. That is the whole arithmetic, and it is the same arithmetic that says the same bed in bark mulch at 3 inches is 25 cubic feet.
Questions this page answers
How many pounds of rubber mulch do I need?
Multiply the volume in cubic feet by the density. At the 37.5 lb/ft³ used here, a 100 square foot bed at 2 inches is 16.7 cubic feet, or about 625 lb. Weigh a bag from your supplier for a figure that matches their stock.
How deep should rubber mulch be on a playground?
CPSC Table 2 lists 6 inches of shredded or recycled rubber for a 10-foot fall height, the shallowest row in the table, with a footnote about maintaining a constant depth. Loose fill compresses, so the initial fill is deeper than the maintained depth. Check the handbook and the equipment manufacturer; this calculator does not certify safety.
Is rubber mulch heavier than bark mulch?
Yes, by volume: about 37.5 lb/ft³ against roughly 15 for bark. A cubic yard of rubber mulch weighs around 1,000 lb, so a small bed can still be several hundred pounds.
Does rubber mulch break down?
No, or at least not on a garden timescale. That is why it lasts, and why it does not improve the soil. It should be removed and recycled rather than composted.
Can I use rubber mulch around vegetables?
Most extension guidance does not recommend it for food crops, and some manufacturers say so on the bag. Keep it to ornamental beds and play areas.
Quantity estimate only. Bulk density varies with moisture and gradation, compaction removes depth from a lift, and the depths quoted for playground surfacing come from CPSC Publication 325 for the material and fall height stated there. Check the CPSC handbook and your equipment manufacturer; this calculator does not certify safety. Nothing you type is uploaded.